Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Antelope
Chimney sweep service in Antelope typically costs $189 – $289 for a standard cleaning and inspection of a factory-built fireplace or gas log set, and most homes here are done in under two hours. We’re talking about newer prefab flues in 95621 and 95843, not the old masonry stacks you see in midtown Sacramento, and that changes how the work needs to be done. We know the tract homes, the wind patterns, and the specific failure points here. Call (855) 341-8804 to book or ask a question.
Roy Delfino runs Chimney Sweep Del Paso Park out of nearby Del Paso Park, and our crews are in Antelope weekly during fire season. The drive is short, so when your fireplace starts smoking on a Tuesday night in November, you don’t wait a week for someone from across the metro area.
Why Chimney Sweep Del Paso Park Is Antelope’s Preferred Chimney Sweep Company
We specialize in exactly three things: chimney sweeping, dryer vent cleaning, and structural chimney repair. That’s it. Homeowners in Antelope call us because we don’t send a general handyman with a shop vac up a ladder. We send a tech who knows the difference between a DuraFlex rigid liner and a scrapped-together double-wall pipe from a big-box store, and who can tell you which one is in your chase.
Our crews work on factory-built fireplaces all over Antelope, from the older homes near Antelope Road down through the subdivisions off Walerga and Elverta. The housing stock here is almost entirely post-1980 tract construction, which means most chimneys are prefabricated metal systems. Local experience with that specific equipment matters. A tech who only works on masonry chimneys doesn’t know what a separated joint looks like inside a 30-year-old factory-built flue. We do.
Most of our Antelope customers come from referrals within those same neighborhoods. A homeowner in Diamond Oaks watches us run a camera, sees exactly what’s going on, and tells their neighbor. That’s how we built a reputation here.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Antelope
Fireplace Cleaning in Antelope is usually a same-visit job, not something you need to book a separate appointment for. We clean the firebox, remove ash and soot buildup, clear the damper and smoke shelf, and run a camera up the flue to check for creosote that a brush pass alone won’t fully remove. A standard fireplace cleaning for a prefab or gas insert home in Antelope runs $189 – $269 depending on condition and last service date.
What We Actually Do In The Box
The firebox gets hand-scraped and vacuumed with a HEPA-filtered vac, not swept out the front door with a broom. Gas log sets come out, get brushed down, and get reinstalled with the burner ports checked for spider webs and debris, which is a real problem in Antelope’s dry summer months. We also inspect the refractory panels on prefab units for cracking that leads to heat transfer into the chase.
When Antelope Homeowners Need It
Call us if you smell smoke in the house when the fireplace is off, if the glass doors are filming over with a brown haze, or if you haven’t had the flue looked at in three years or more. If you just bought a home in 95621 or 95843 and have no record of the last sweep, assume it hasn’t been done and book a cleaning plus Level 1 inspection. One visit covers both.
Chimney Services in Antelope
Chimney Services in Antelope covers three tiers: a Level 1 inspection with a visual sweep, a Level 2 camera inspection for when something looks wrong or a home just sold, and actual repair work on caps, crowns, flashings, and flue liners. In Antelope’s housing stock, the most common service call is a Level 2 inspection after a smoky-fireplace episode. The cleaning is part of it. The camera is what tells you if there’s more going on.
Camera Inspections Before Any Repair Quote
Here’s how it works in Antelope specifically. We don’t hand you a quote for a new cap or relining based on what we see from the roof. We run a camera up the flue and down from the top, record the footage, and show it to you on a monitor before we recommend anything. If there’s a wasp nest packed against a failing cap, you’ll see it. If there’s a separated joint 8 feet up, you’ll see that too. If we can’t find a problem, we say so and charge you only for the sweep.
Factory-Built Flue Repairs
For Antelope’s prefab systems, the common repairs are cap replacement, chase cover resealing, joint sealing, and HeatShield resurfacing when the inner liner has begun to corrode but the structure is sound. HeatShield is a manufacturer-backed ceramic coating system we’re authorized to install. It’s not a patch job. For chimney repair in Antelope that requires parts, we stock common cap sizes and pipe sections for the tract-home models we see most, so we’re not ordering parts and rescheduling.
Trusted Brands We Service in Antelope
We work with professional-grade product lines that certified chimney technicians across the country use, not the generic equivalents you’ll find on a hardware shelf. That includes Gelco caps and chase covers, Olympia Chimney components, Famco termination caps, and Copperfield flashings and support kits. When an Antelope homeowner needs a replacement cap on a builder-grade flue, we install one that’s rated for the wind exposure these open-lot subdivisions get. We keep common Gelco and Famco sizes stocked so most cap replacements in 95621 and 95843 happen same-day with no second trip.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Antelope Homes
- Wasp and bird nests in uncapped builder-grade flues. In Antelope’s open-lot subdivisions, the dry summer gives insects and birds months to build inside a flue that has no cap or a cap that’s rusted through. The first sign is smoke backing up into the living room on the first cold night.
- Separated joints in prefab metal flues. Factory-built chimney sections can shift or separate over 25 – 40 years, especially through freeze-thaw cycles in winter. A brush-only sweep glides right past a separated joint. A camera doesn’t.
- Creosote buildup from infrequent burning. Homeowners here use fireplaces a few months a year. That intermittent use actually builds creosote unevenly, especially when fires are small and smoldering. We see first-degree and second-degree creosote in most Antelope flues that haven’t been swept in 3+ years.
- Dryer vents clogged with Sacramento Valley lint and dust. Antelope’s dry summers mean more airborne lint in the vent line, and the long straight runs in 1980s – 2000s homes often sag, creating a catch point. We clean dryer vents as a core service because the fire risk is just as real as a dirty chimney.
Pricing for Chimney Sweep in Antelope, CA
A standard sweep plus Level 1 inspection for a factory-built fireplace in Antelope runs $189 – $289. A Level 2 camera inspection is $249 – $399 depending on flue height and access. Gas log sets with a cleaning and burner check are $149 – $219. Cap replacement on a prefab system typically runs $225 – $475 including the Gelco or Famco part, and that’s the repair we do most often in 95621 and 95843. HeatShield resurfacing starts around $1,800 but only gets quoted after camera footage shows it’s needed. Estimates are free; call (855) 341-8804 and we’ll give you a firm price before we start.
We Also Serve Cities Near Antelope
Our crews work throughout northern Sacramento County. If you’re in Foothill Farms, Citrus Heights, Roseville, or Fair Oaks, you’re within our normal service area. For details on the fireplaces and flue systems common in this part of the county, see our Chimney Sweep in Antelope page or call us directly for scheduling.
Serving Antelope, CA – Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Antelope
Yes, and in some ways it’s more important for prefab systems than masonry. Factory-built chimneys in Antelope have inner liners that can’t take the same heat cycles as a clay tile flue, and creosote in a metal flue corrodes the liner faster. We recommend an annual sweep for any home that burns wood more than a dozen times a season, and at minimum a sweep plus Level 2 inspection every three years for gas log sets. The cleaning itself is quick. The reason to do it annually is that Antelope’s long idle season lets debris and insect nests accumulate. Call (855) 341-8804 to schedule before fire season starts.
Because moisture swells whatever has been nesting or accumulating in your flue all summer. In Antelope’s dry months, wasps build nests inside uncapped builder-grade flues. Those nests sit dry and passable for months. Then the first rain hits, the nest absorbs water and swells, and suddenly the flue is blocked enough that smoke can’t draft. It’s the single most common November call we get in 95621 and 95843. The fix is clearing the nest and usually replacing a rusted or missing cap, which our techs do in one visit. If it’s happening to you, call (855) 341-8804 before the next cold front.
Yes, and we won’t quote a repair without it. Every Level 2 inspection we do in Antelope includes camera footage you can watch in real time. Before we recommend a cap replacement, a liner resurfacing, or anything beyond the sweep, we put the monitor in front of you and point to the problem on screen. If there’s no problem, we tell you. This is how we operate specifically because Antelope’s housing stock gets targeted with unnecessary relining quotes by companies that never show the homeowner what’s actually inside the flue.
First-degree creosote is soft, flaky, and brushable. Third-degree is a hard, tar-like glaze that a standard brush won’t remove and that’s highly combustible. In Antelope’s climate, we see first-degree in most flues that haven’t been cleaned in a few years, but third-degree forms when homeowners burn low, smoldering fires or untreated softwood. Third-degree needs chemical treatment or mechanical removal, not just a sweep. Understanding the difference matters because it changes what you pay and what’s actually needed. We’ll show you which one you have on camera before we do any removal work.
We can sweep it, and we do more prefab metal flues in Antelope than masonry chimneys. This is exactly what the housing stock here is built with. Sweeping a factory-built chimney requires knowing the pipe brand, the joint design, and the right brush type; poly brushes scratch metal liners and should not be used, for example. We carry the correct equipment for these systems and we know the failure points: separated joints, crushed inner liners, and corroded caps. No masonry specialist needed, and honestly, most masonry-focused sweeps don’t know these systems well. Call (855) 341-8804 and we’ll confirm what’s in your chase before we come out.
Written by Roy Delfino, Owner at Chimney Sweep Del Paso Park, serving Antelope and northern Sacramento County since founding the company.
Ready to get your fireplace inspected before you light it? Call (855) 341-8804 for a free estimate. We’ll tell you what’s actually going on, show you the camera footage, and only recommend work you can verify with your own eyes.